A large commercial rooftop can be far more than just part of a building’s structure — it can be a fully fledged energy asset.
At one operating commercial facility, the Rayton team delivered an industrial rooftop solar power plant with a total capacity of 1.761 MW. The project was carried out in three phases on site, while the facility continued to operate as usual.
1.761 MW of on-site solar generation
The plant uses 620 W Trina Solar modules.
Key project specifications:
- total plant capacity — 1.761 MW;
- delivery — in three phases;
- modules — Trina Solar 620 W;
- module layout — East–West;
- mounting system — non-ballasted.
However, an industrial solar plant of this scale involves much more than installing a large number of panels.
The design has to account for the roof structure and permissible loads, equipment layout, maintenance walkways, safety requirements, installation logistics and future servicing of the system.
That is why this project uses a non-ballasted mounting system, with the modules arranged in an East–West configuration.
Why an East–West configuration?
For a commercial facility, what matters is not only peak output but also how closely the generation profile matches the business’s actual consumption.
An East–West layout spreads solar generation more evenly across the day and aligns it more closely with the facility’s operating hours.
While the plant is generating, part of the current load is covered by on-site generation right where the energy is consumed.
As a result, the business can draw less power from the grid, keep better control of its energy costs and partly reduce its dependence on external supply.
In effect, roof space that previously served no economic purpose becomes an asset that generates electricity for the business every day.
Rayton’s engineering expertise
Delivering large industrial solar plants is one of the areas where the Rayton team has been steadily building its expertise.
In 2026, the company was also named among Forbes Ukraine’s TOP-10 solar and battery storage installers. For Rayton, this is above all a recognition of the scale of its completed projects and the growth of its in-house engineering capability.
Our job today is not simply to install equipment, but to create energy solutions that fit how each specific business actually operates.
Your large roof can work for your business
If your facility has a large roof area and steady daytime electricity consumption, on-site solar generation can become part of its energy infrastructure.
Rayton starts with analysis and calculations, designs a solution tailored to the specific site and delivers it all the way through to full commissioning.
Planning an industrial solar plant for your business? Get in touch with Rayton, and we will design a solution based on your site’s parameters and business goals.
